Engine Control Module (ECM): Removal

Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Remove the glove box lower cover. Refer to REMOVAL , Glove Box .
Remove the lower inner trim of passenger's side.
Refer to REMOVAL , Lower Inner Trim .
Turn over the floor mat of passenger's seat.
Remove the protect cover.

Fig 2: Locating Glove Box Lower Cover Bolts
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolts and nuts which hold the ECM to the bracket.

Fig 3: Locating ECM Bracket Bolts
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the ECM connectors, and take out the ECM.