System Specifications

Timing cover 5 Nm (0.5 kgf-m, 3.7 ft lb)
Belt tensioner 39 Nm (4.0 kgf-m, 28.8 ft lb)
Crank pulley bolt
Tighten temporarily 44 N-m (4.5 kgf-m, 32.5 ft-lb)
Tightening torque 180 N-m (18.4 kgf-m, 132.8 ft-lb)

Check that the tightening angle of the crank pulley bolt is 65 degrees or more.
If the tightening angle of crank pulley bolt is less than 65 degrees, the bolt is damaged. In this case, the bolt must be replaced.

Tighten temporarily 44 N-m (4.5 kgf-m, 32.5 ft-lb).
Tighten 65° to 75°