Fuel Filler Pipe: Assembly

Install the shut valve to the fuel filler pipe. Refer to INSTALLATION , Shut Valve.
Tighten the nuts which secure the evaporation pipe assembly to the fuel filler pipe.
Tightening torque:

7.5 N.m (0.76 kgf-m, 5.5 ft-lb)

Fig 1: Locating Nut Which Holds Evaporation Pipe Assembly To Fuel Filler Pipe (1 Of 2)
Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Locating Nut Which Holds Evaporation Pipe Assembly To Fuel Filler Pipe (2 Of 2)
Courtesy of SUBARU OF AMERICA, INC.
Connect the evaporation hose to the shut valve.

Fig 3: Locating Evaporation Hose Clips
Courtesy of SUBARU OF AMERICA, INC.