RH Side

Release the fuel pressure. Refer to RELEASING OF FUEL PRESSURE , PROCEDURE, Fuel.
Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Open the fuel filler lid, and remove the fuel filler cap.
Remove the intake boot.
Remove the spark plug cords from spark plugs (#1 and #3 cylinders).
Remove the fuel pipe protector RH.

Fig 2: Locating Fuel Pipe Protector RH
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connectors (A) from fuel injector.
Remove the harness band (B) which holds the engine harness to injector pipe.

Fig 3: Identifying Harness Band Which Holds Engine Harness To Injector Pipe
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolt which holds fuel injector pipe onto intake manifold.

Fig 4: Locating Bolt Which Holds Fuel Injector Pipe Onto Intake Manifold
Courtesy of SUBARU OF AMERICA, INC.
Remove the fuel injector while lifting up the fuel injector pipe.