At Shift Control

Turn the ignition switch to ON.
While brake pedal is not depressed, check if the select lever does not move from "P" range.
While brake pedal is depressed, check if the select lever moves from "P" range.
Set the select lever to other than "P" range.
When the ignition switch is turned to OFF, check if the ignition key switch cannot be removed.

Set the AT selector lever to each gear position and check the shifting while driving the vehicle.

Fig 1: Identifying AT Shift Control Range

Courtesy of SUBARU OF AMERICA, INC.

4AT

SELECTOR POSITION

5AT

SELECTOR POSITION