Pre-Delivery Inspection (PDI) Procedure: Notes

STATIC CHECKS JUST AFTER VEHICLE RECEIPT 

Procedure	Check point
1. Appearance check	If the vehicle is covered with protective coating, visually check the vehicle body for damage and dents. If the protective coating has been removed, visually check the body painted area for damage or stains in detail. Visually check the glass and light lenses for any damage, cracks or excessive gaps between body sheet metal. Visually check the plated parts for any damage.
2. Tire check	Check the tires for damage, defective, and dents on wheels. Check the tire air pressure.
3. Fuse installation	If the vehicle is about to be delivered to customer, attach a back-up fuse.
4. Lock/unlock and open/close operation checks of doors	Using the key, check the trunk lid can be locked or unlocked normally. Open and close all doors to check that there are no defective. Operate the power door lock switch to check that the door (rear gate) is locked and unlocked normally.
5. Child safety lock system	Check the child safety lock system operates normally.
6. Open/close operations checks of trunk lid	Operate the trunk lock release lever to check that the trunk lid opens normally. Check that main and sub keys can lock/unlock the release lever, and that valet key can not lock/unlock the release lever. Open and close the trunk lid to see that there are no abnormal conditions.
7. Operation check of trunk lid release lever	Operate the trunk lid release lever to check that the trunk lock is unlocked normally.
8. Rear gate lock/unlock and open/close	Check if the rear gate can be unlocked normally through the emergency hole. Open and close the rear gate to see that there are no abnormal conditions.
9. Fuel lid opener lock release lever	Operate the fuel lid opener to check that the fuel filler lid can be unlocked normally.
10. Accessory check	Check that the following accessories are provided. Owner's manual Warranty booklet Maintenance note Spare key Jack Tool set Spare tire
11. Front hood lock release system	Operate the front hood lock release lever to check that the front hood is unlocked normally.
12. Battery	Check the battery terminals for any abnormal conditions such as rust and trace of battery fluid leaks.
13. Brake fluid	Check that the fluid level is normal.
14. Engine oil	Check that the oil level is normal.
15. Transmission gear oil	Check that the transmission gear oil level is normal.
16. AT front differential gear oil	Check that the AT front differential oil level is normal.
17. Engine coolant	Check that the engine coolant level is normal.
18. Clutch fluid	Check that the clutch fluid level is normal.
19. Window washer fluid	Check that the window washer fluid level is normal.
20. Front hood latch	Check that the hood is closed and latched securely.
21. Keyless entry system	Check that the keyless entry system operates normally.
22. Alarm system (Anti-theft alarm)	Check that the alarm system (anti-theft alarm) operates normally.
23. Seat	Check the seat surfaces for stains or dirt. Check the seat installation conditions and functionality. Check that the occupant detection system for passenger's seat operates normally.
24. Seat belt	Check the seat belt installation conditions and functionality. Check that the seat belt warning system operates normally.

CHECKS WITH THE ENGINE RUNNING 

Procedure	Check point
25. Delivery (test) mode connector	Turn the ignition switch to ON and check that the malfunction indicator light starts blinking.
26. Immobilizer system	Check that the engine starts with all keys that are equipped on vehicle. 60 seconds after turning ignition switch from ON to ACC or OFF, or immediately after removing the key, check that the security indicator light blinking.
27. Starting condition	Start the engine and check that the engine starts smoothly.
28. Exhaust system	Check that the exhaust noise is normal and no leaks are found.
29. Indicator and warning lights	Check that all indicator lights and warning lights operate normally.
30. Heater & ventilation	Check that the heater & ventilation system operates normally.
31. Air conditioner	Check that the air conditioner operates normally.
32. Clock	Check that the clock operates normally.
33. Audio	Check the radio and CD player for normal operation.
34. Navigation system	Check all display functions for normal operation. Check the map disc (DVD) are provided on vehicle. Check that the navigation system operates normally.
35. Front accessory power supply socket	Check that the front accessory power supply socket operates normally.
36. Lighting system	Check that the lighting system operates normally.
37. Wiper deicer	Check that the wiper deicer operates normally.
38. Illumination control	Check that the illumination control operates normally.
39. Window washer	Check that the window washer system operates normally.
40. Wiper	Check that the wiper system operates normally.
41. Power window	Check the power window for normal operations.
42. Sunroof	Check that the sunroof operates normally.
43. Door mirror	Check that the remote control mirror operates normally.

DYNAMIC TEST WITH THE VEHICLE RUNNING 

Procedure	Check point
44. Brake test	Check the foot brake for normal operations.
45. Parking brake	Check the parking brake for normal operations.
46. AT shift control	Check that the AT shift patterns are correct.
47. Cruise control	Check that the cruise control system operates normally.

CHECKS AFTER DYNAMIC TEST 

Procedure	Check point
48. ATF level	Check that the ATF level is correct.
49. Power steering fluid level	Check that the power steering fluid level is normal.
50. Fluid leakage	Check for fluid/oil leaks.
51. Water leak test	Spray the vehicle with water and check for water leaks.
52. Appearance check 2	Remove the protective coating (if equipped). Check the body paints for damage and stain. Check the plated parts for damage and rust.