LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2009 >> Outback Limited >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> A/T & M/T Control Systems >> Paddle Shift Assembly >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Paddle Shift Assembly: Removal

  1. Disconnect the ground cable from the battery.
  2. Set the tire to the straight-ahead position.
  3. Remove the airbag module. Ref. to REMOVAL , Driver's Airbag Module.
    WARNING: If there are airbag modules mounted, always ref. to CAUTION , General Description.
  4. Remove the steering wheel. Ref. to REMOVAL , Steering Wheel.
  5. Remove the column cover.
  6. Disconnect the connector of paddle shift assembly.
    Fig 1: Locating Paddle Shift Assembly Connector
    G05666148Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the paddle shift assembly.
    Fig 2: Locating Paddle Shift Assembly Mounting Nuts
    G05666149Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals