SI-DRIVE (SUBARU Intelligent Drive) Selector: Removal

Disconnect the ground cable from battery.

Fig 1: Disconnecting Battery Ground Cable
Courtesy of SUBARU OF AMERICA, INC.
Remove the console box. Refer to REMOVAL , Glove Box.
Disconnect the SI-DRIVE selector connector.

Fig 2: Locating SI-DRIVE Selector Connector
Courtesy of SUBARU OF AMERICA, INC.
Remove the screws which secure the SI-DRIVE selector to the console box.

Fig 3: Locating SI-DRIVE Selector Screws
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector from SI-DRIVE selector cover, and remove the SI-DRIVE selector.

Fig 4: Locating SI-DRIVE Selector Connector
Courtesy of SUBARU OF AMERICA, INC.