LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2009 >> Outback i, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H4SO) >> Variable Valve Lift Diagnosis Oil Pressure Switch >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Variable Valve Lift Diagnosis Oil Pressure Switch: Removal

  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G05019586Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the air intake chamber. Refer to REMOVAL , Air Intake Chamber.
  3. Disconnect the connector from the variable valve lift diagnosis oil pressure switch.
  4. Remove the variable valve lift diagnosis oil pressure switch.
    • LH side
      Fig 2: Locating Variable Valve Lift Diagnosis Oil Pressure Switch Connector - LH Side
      G04997419Courtesy of SUBARU OF AMERICA, INC.
    • RH side
      Fig 3: Locating Variable Valve Lift Diagnosis Oil Pressure Switch Connector - RH Side
      G04997420Courtesy of SUBARU OF AMERICA, INC.