LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2009 >> Tribeca Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H6DO) >> Fuel Filler Pipe >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Filler Pipe: Removal

WARNING: Place "NO OPEN FLAMES" signs near the working area.
CAUTION: Be careful not to spill fuel.
  1. Set the vehicle on a lift.
  2. Release the fuel pressure. Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE, Fuel.
  3. Drain fuel. Ref. to DRAINING FUEL (WITH SUBARU SELECT MONITOR) , PROCEDURE, Fuel.
  4. Disconnect the ground cable from battery.
  5. Open the fuel filler lid, and remove the fuel filler cap.
  6. Remove the bolt which secures the gasket.
    Fig 1: Identifying Fuel Filler Cap Bolts
    G04997449Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the rear wheel RH.
  8. Lift up the vehicle.
  9. Remove the mud guard. Ref. to REMOVAL , Mud Guard.
  10. Remove the rear suspension assembly. Ref. to REMOVAL , Rear Sub Frame.
  11. Disconnect the fuel filler hose.
    Fig 2: Identifying Fuel Filler Hose
    G05031097Courtesy of SUBARU OF AMERICA, INC.
  12. Remove the bolts which hold fuel filler pipe bracket on the body.
    Fig 3: Locating Fuel Filler Pipe Bracket And Bolts
    G05031098Courtesy of SUBARU OF AMERICA, INC.
  13. Remove the fuel filler pipe to the underside of the vehicle.