Differential Case Assembly

Remove the taper roller bearing using the ST and a press.
ST 498077000 REMOVER

Fig 1: Identifying Taper Roller Bearing
Courtesy of SUBARU OF AMERICA, INC.
Secure the case in a vise, remove the hypoid driven gear tightening bolts, then separate the hypoid driven gear into case (RH) and case (LH).

Fig 2: Removing Hypoid Driven Gear
Courtesy of SUBARU OF AMERICA, INC.
Pull out the straight pin and shaft, and then remove the differential bevel gear, washer and differential bevel pinion.

Fig 3: Identifying Differential Case
Courtesy of SUBARU OF AMERICA, INC.