Special Tool

SPECIAL TOOL CHART

ILLUSTRATION	TOOL NUMBER	DESCRIPTION	REMARKS
Courtesy of SUBARU OF AMERICA, INC.	498575400	OIL PRESSURE GAUGE ASSY	Used for measuring oil pressure.
Courtesy of SUBARU OF AMERICA, INC.	498897200	OIL PRESSURE ADAPTER	Used with oil pump cover installed on when measuring line pressure.
Courtesy of SUBARU OF AMERICA, INC.	498897800	OIL PRESSURE ADAPTER SET	Used for measuring transfer clutch pressure.
Courtesy of SUBARU OF AMERICA, INC.	498545400	FILTER WRENCH	Used for removing and installing the ATF filter.
Courtesy of SUBARU OF AMERICA, INC.	498277200	STOPPER SET	Used for preventing the torque converter assembly from falling when removing and installing automatic transmission assembly.
Courtesy of SUBARU OF AMERICA, INC.	41099AA010	ENGINE SUPPORT BRACKET	Used for supporting engine.
Courtesy of SUBARU OF AMERICA, INC.	41099AA020	ENGINE SUPPORT	Used for supporting engine.
Courtesy of SUBARU OF AMERICA, INC.	398527700	PULLER ASSY	Used for removing the extension case roller bearing. Used for removing the extension oil seal. Used for removing the front differential side retainer bearing outer race. Used for removing the front differential side retainer oil seal.
Courtesy of SUBARU OF AMERICA, INC.	498057300	INSTALLER	Used for installing the extension oil seal.
Courtesy of SUBARU OF AMERICA, INC.	498077000	REMOVER	Used for removing the differential taper roller bearing.
Courtesy of SUBARU OF AMERICA, INC.	18630AA010	WRENCH COMPL RETAINER	Used for removing and installing the differential side retainer.
Courtesy of SUBARU OF AMERICA, INC.	398487700	DRIFT	Used for installing the front differential taper roller bearing.
Courtesy of SUBARU OF AMERICA, INC.	498255400	PLATE	Used for measuring the backlash of hypoid gear.
Courtesy of SUBARU OF AMERICA, INC.	498247001	MAGNET BASE	Used for measuring the gear backlash. Used with DIAL GAUGE (498247100).
Courtesy of SUBARU OF AMERICA, INC.	498247100	DIAL GAUGE	Used for measuring the gear backlash. Used with MAGNET BASE (498247001).
Courtesy of SUBARU OF AMERICA, INC.	498517000	REPLACER	Used for removing the front roller bearing.
Courtesy of SUBARU OF AMERICA, INC.	499787700	WRENCH	Used for removing and installing the drive pinion lock nut.
Courtesy of SUBARU OF AMERICA, INC.	398643600	GAUGE	Used for measuring the total end play, extension end play and drive pinion height.
Courtesy of SUBARU OF AMERICA, INC.	398744300	PISTON GUIDE	Used for measuring height from mating surface of the main case to pressure plate.
Courtesy of SUBARU OF AMERICA, INC.	499737100	PULLER SET	Used for removing the reduction driven gear assembly.
Courtesy of SUBARU OF AMERICA, INC.	498077600	REMOVER	Used for removing the ball bearing.
Courtesy of SUBARU OF AMERICA, INC.	18667AA010	HOLDER	Used for removing and installing the drive pinion lock nut. Used as a handle to rotate gear when checking tooth contact.
Courtesy of SUBARU OF AMERICA, INC.	1B022XU0	SUBARU SELECT MONITOR III KIT	Used for troubleshooting for electrical system.
Courtesy of SUBARU OF AMERICA, INC.	18675AA000	DIFFERENTIAL SIDE OIL SEAL INSTALLER	Used for installing the differential side retainer oil seal.
Courtesy of SUBARU OF AMERICA, INC.	18654AA000	INSTALLER	Used for removing and installing the ball bearing.
Courtesy of SUBARU OF AMERICA, INC.	28399SA010	OIL SEAL PROTECTOR	Used for protecting oil seal when installing front drive shaft.
Courtesy of SUBARU OF AMERICA, INC.	18763AA000	COMPRESSOR SHAFT	Used for disassembling multi-plate clutch for shift transmission.
Courtesy of SUBARU OF AMERICA, INC.	18765AA000	COMPRESSOR SUPPORT	Used for disassembling multi-plate clutch for shift transmission.
Courtesy of SUBARU OF AMERICA, INC.	18676AA020	TORX® WRENCH	Used for disassembling torque converter case.
Courtesy of SUBARU OF AMERICA, INC.	18854AA000	ANGLE GAUGE	Used for tightening parking support.
Courtesy of SUBARU OF AMERICA, INC.	498077300	REMOVER	Used for removing ball bearing of reduction driven gear.
Courtesy of SUBARU OF AMERICA, INC.	499587100	OIL SEAL INSTALLER	Used for installing the oil seal.
Courtesy of SUBARU OF AMERICA, INC.	499787500	ADAPTER	Used for removing and installing drive pinion lock nut.
Courtesy of SUBARU OF AMERICA, INC.	499575400	GAUGE	Used for measuring height of total end play.
Courtesy of SUBARU OF AMERICA, INC.	18762AA000	COMPRESSOR SPECIAL TOOL	Used for disassembling multi-plate clutch for shift transmission.
Courtesy of SUBARU OF AMERICA, INC.	499755602	PRESS	Used for installing the parking gear.
Courtesy of SUBARU OF AMERICA, INC.	18680AA010	HOLDER GEAR	Used for removing reduction driven gear assembly. (2-piece set)
Courtesy of SUBARU OF AMERICA, INC.	18766AA000	SUPPORT PULLER	Used for removing reduction driven gear assembly.
Courtesy of SUBARU OF AMERICA, INC.	18767AA000	REMOVER	Used to pull out the parking gear. Used to pull out the bearing from the VTD assembly.