MT Gear Shift Lever: Removal
- Set the vehicle on a lift.
- Disconnect the ground cable from the battery.
- Remove the gear shift knob.
- Remove the console front panel and console boot.
- Remove the console cover and console box. Refer to REMOVAL , Console Box.
- Remove the clamp.
- Remove the boot and insulator assembly.
- Remove the harness clamp from the plate assembly.
- Remove the plate assembly from the vehicle body.
- Lift up the vehicle.
- Remove the rear exhaust pipe and muffler.
Refer to REMOVAL , Rear Exhaust Pipe. Refer to REMOVAL , Muffler.
- Remove the heat shield cover.
- Remove the stay from transmission bracket.
- Remove the rod from joint.
- Remove the cushion rubber from the vehicle body.
- Extract the spring pin and remove the joint.
- Lower the vehicle.
- Remove the gear shift lever.