LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2010 >> Forester X, Automatic >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transmission Control System >> AT Shift Lock Control System >> Inspection >> Shift Lock Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Shift Lock Operation

SHIFT LOCK INSPECTION PROCEDURE

Step Check Yes No
1 CHECK SHIFT LOCK  .
  1. Turn the ignition switch to ON.
  2. Shift the select lever to the "P" range.
 While brake pedal is not depressed, is it possible to move the select lever from the "P" range to other ranges? Perform the inspection of "SELECT LEVER CANNOT BE LOCKED OR RELEASED". Refer to SELECT LEVER CANNOT BE LOCKED OR RELEASED , INSPECTION, AT Shift Lock Control System. Go to step 2  .
2 CHECK SHIFT LOCK  . While brake pedal is depressed, is it possible to move the select lever from the "P" range to other ranges? Go to step 3  . Perform the inspection of "SELECT LEVER CANNOT BE LOCKED OR RELEASED". Refer to SELECT LEVER CANNOT BE LOCKED OR RELEASED , INSPECTION, AT Shift Lock Control System.
3 CHECK SHIFT LOCK  .
Shift the select lever to "N" range.		 Is it possible to move the select lever from the "N" range to the "P" range? Go to step 4  . Perform the inspection of "SELECT LEVER CANNOT BE LOCKED OR RELEASED". Refer to SELECT LEVER CANNOT BE LOCKED OR RELEASED , INSPECTION, AT Shift Lock Control System.
4 CHECK SHIFT LOCK  .
  1. Shift the select lever to "N" range.
  2. Turn the ignition switch to OFF.
 While brake pedal is depressed, is it possible to move the select lever from the "N" range to the "P" range? Go to step 5  . Perform the inspection of "SELECT LEVER CANNOT BE LOCKED OR RELEASED". Refer to SELECT LEVER CANNOT BE LOCKED OR RELEASED , INSPECTION, AT Shift Lock Control System.
5 CHECK KEY INTERLOCK  .
  1. Turn the ignition switch to OFF.
  2. Shift the select lever to other than "P" range.
 Can the ignition key be removed? Perform the inspection of "KEY INTERLOCK CANNOT BE LOCKED OR RELEASED". Refer to KEY INTERLOCK CANNOT BE LOCKED OR RELEASED , INSPECTION, AT Shift Lock Control System. Go to step 6  .
6 CHECK KEY INTERLOCK  .
Shift the select lever to the "P" range.		 Can the ignition key be removed? AT shift lock system is normal. Perform the inspection of "KEY INTERLOCK CANNOT BE LOCKED OR RELEASED". Refer to KEY INTERLOCK CANNOT BE LOCKED OR RELEASED , INSPECTION, AT Shift Lock Control System.
scientia non olet · About LEMON Manuals