April 5, 2026: LEMON Manuals is launched! Read the announcement.

Select Lever: Removal

Set the vehicle on a lift.
Disconnect the ground cable from the battery.
Shift the select lever to "N" range.
Lift up the vehicle.
Remove the rear exhaust pipe and muffler.
- Non-turbo model
- Turbo model
Refer to REMOVAL , Rear Exhaust Pipe. Refer to REMOVAL , Muffler.
Remove the heat shield cover.

Fig 1: Identifying Heat Shield Cover

G05661183

Courtesy of SUBARU OF AMERICA, INC.

Remove the cable from arm assembly.

Fig 2: Identifying Arm Assembly And Adjusting Nut

G05955784

Courtesy of SUBARU OF AMERICA, INC.

Raise the claw of clamp to remove the cable.

Fig 3: Identifying Claw

G05955785

Courtesy of SUBARU OF AMERICA, INC.

Lower the vehicle.
Remove the grip.
Remove the hand brake boot cover.
Remove the console front panel.

Fig 4: Identifying Hook

G05955786

Courtesy of SUBARU OF AMERICA, INC.

Remove the console cover and console box. Refer to REMOVAL , Console Box.
Remove the indicator assembly.

Fig 5: Locating Indicator Assembly

G05661187

Courtesy of SUBARU OF AMERICA, INC.

Remove the harness clips from the bracket.
Remove the blind.

Fig 6: Identifying Blind

G05661188

Courtesy of SUBARU OF AMERICA, INC.

Disconnect the connectors, and then remove the four bolts to take out the select lever assembly from vehicle body.

Fig 7: Locating Select Lever Assembly Bolts

G05661189

Courtesy of SUBARU OF AMERICA, INC.