Transmission Control Module (TCM): Installation
- Install the TCM to the bracket.CAUTION: To avoid the damage to bracket and TCM, do not remove after installing TCM to bracket. If installed by mistake, the part must be replaced with a new part.
- Install the TCM.
Tightening torque:
7.5 N.m (0.76 kgf-m, 5.5 ft-lb)
- Install the harness connector to TCM.
- Install the instrument panel lower cover. Ref. to INSTALLATION , Instrument Panel Lower Cover.
- Execute the learning control promotion. Ref. to LEARNING CONTROL .