Fuel Injector: Removal

Release the fuel pressure. < Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE. >
Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Open the fuel filler lid and remove the fuel filler cap.
Remove the air intake boot. (RH side only) < Ref. to REMOVAL , Air Intake Boot. >
Disconnect the connector (A) from the mass air flow and intake air temperature sensor, and remove the clip (B) which holds the mass air flow and intake air temperature sensor harness. (RH side only)
Remove the suction hose (C) from the air cleaner case (rear). (RH side only)

Fig 2: Mass Air Flow And Intake Air Temperature Sensor Connector And Suction Hose
Courtesy of SUBARU OF AMERICA, INC.
Remove the air cleaner case (rear). (RH side only)

Fig 3: Locating Air Cleaner Case Clamps
Courtesy of SUBARU OF AMERICA, INC.
Remove the intake manifold protector.
- LH side
  
  Fig 4: Locating Intake Manifold Protector Mounting Bolts
  Courtesy of SUBARU OF AMERICA, INC.
- RH side
  
  Fig 5: Locating Intake Manifold Protector Mounting Bolt
  Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connectors (A) from fuel injector.
Remove the bolts which hold fuel pipe onto the cam carrier.

Fig 6: Locating Cam Carrier Mounting Bolts
Courtesy of SUBARU OF AMERICA, INC.
Remove the fuel injector.

Fig 7: Removing Fuel Injector
Courtesy of SUBARU OF AMERICA, INC.