LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2011 >> Forester X, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (Fuel Systems) (H4DO) >> Crankshaft Position Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Crankshaft Position Sensor: Removal

  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G07664711Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the air intake boot. < Ref. to REMOVAL , Air Intake Boot. >
  3. Disconnect the connector (A) from the crankshaft position sensor, and remove the crankshaft position sensor from the cylinder block.
    Fig 2: Locating Crankshaft Position Sensor Connector
    G07664712Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals