LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2011 >> Outback R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Torque Converter Assembly >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Torque Converter Assembly: Removal

  1. Remove the transmission assembly from vehicle body. Refer to , REMOVAL , Automatic Transmission Assembly.
  2. Pull out the torque converter and oil pump shaft horizontally.
    NOTE:
    • Be sure not to scratch the inside of bushing in oil pump shaft.
    • Be careful that the oil pump shaft may drawn out simultaneously.
      Fig 1: Identifying Torque Converter Assembly
      G05002574Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the oil pump shaft from torque converter as necessary.
scientia non olet · About LEMON Manuals