EGR Valve Control
CAUTION:
After executing the system operation check mode, execute the Clear Memory Mode. < refer to
OPERATION , Clear Memory Mode >
- On << System Operation Check Mode >> display, select {EGR Valve Control}.
- On << Start the Engine >> display, start the engine and click the [OK] button.
- In the << EGR Valve Control >> display, click the ↑ button or the ↓ button to change the setting values, then click the [OK] button.
Setting is possible in increments of 1 STEP. However, the STEP number that can actually be controlled will vary depending on the vehicle.
- Click the [Cancel] button to stop the EGR valve control.
- Click the [[F12] Exit] button to end the EGR valve control. The screen will return to the << System Operation Check Mode >> screen.NOTE: For detailed operation procedures, refer to application help for Subaru Select Monitor.