Fuel Pump Control (Off Drive)
CAUTION:
After executing the system operation check mode, execute the Clear Memory Mode < refer to
OPERATION , Clear Memory Mode >.
- On << System Operation Check Mode >> display, select {Fuel Pump Control}.
- On << Fuel Pump Control >> display, select {OFF Drive}.
- On << Start the Engine >> display, start the engine and click the [OK] button.
- On << OFF Drive >> display, click the [Execution] button and execute the OFF drive.
- Click the [Cancel] button to stop the OFF drive.
- Click the [[F12] Exit] button to end the OFF drive. The screen will return to the << Fuel Pump Control >> screen.
NOTE:
For detailed operation procedures, refer to application help for Subaru Select Monitor.