Injector Control (Injection Stop Mode)
CAUTION:
After executing the system operation check mode, execute the Clear Memory Mode. < refer to
OPERATION , Clear Memory Mode >
- On << System Operation Check Mode >> display, select {Injector Control}.
- On << Injector Control >> display, select {Injection Stop Mode}.
- On << Injection Stop Mode >> display, select the fuel injector to be stopped.
- On << Start the Engine >> display, start the engine and click the [OK] button.
- On << Fuel Injector # >> display, click the [Execution] button and execute the injection stop mode.
- Click the [Cancel] button to stop the injection stop mode.
- Click the [[F12] Exit] button to return the << Injection Stop Mode >> display screen.
- On the << Injection Stop Mode >> display, click the [Return] button to end the << Injection Stop Mode >>. The screen will return to the << Injector Control >> screen.NOTE: For detailed operation procedures, refer to application help for Subaru Select Monitor.