Special Tool

SPECIAL TOOL DESCRIPTION CHART

ILLUSTRATION	TOOL NUMBER	DESCRIPTION	REMARKS
Courtesy of SUBARU OF AMERICA, INC.	498575400	OIL PRESSURE GAUGE ASSY	Used for measuring oil pressure.
Courtesy of SUBARU OF AMERICA, INC.	498897200	OIL PRESSURE GAUGE ADAPTER	Used at the oil pump housing when measuring reverse clutch pressure and line pressure.
Courtesy of SUBARU OF AMERICA, INC.	498897700	OIL PRESSURE ADAPTER SET	Used for measuring transfer clutch pressure.
Courtesy of SUBARU OF AMERICA, INC.	498277200	STOPPER SET	Used for removing and installing automatic transmission assembly to engine.
Courtesy of SUBARU OF AMERICA, INC.	398527700	PULLER ASSY	Used for removing the extension case roller bearing. Used for removing the extension oil seal. Used for removing the front differential side retainer bearing outer race. Used for removing the front differential side retainer oil seal.
Courtesy of SUBARU OF AMERICA, INC.	498057300	INSTALLER	Used for installing the extension oil seal.
Courtesy of SUBARU OF AMERICA, INC.	41099AC000	ENGINE SUPPORT ASSY	Used for supporting the engine. For turbo models.
Courtesy of SUBARU OF AMERICA, INC.	41099AA010	ENGINE SUPPORT BRACKET	Used for supporting the engine. For non-turbo models.
Courtesy of SUBARU OF AMERICA, INC.	41099AA020	ENGINE SUPPORT	Used for supporting the engine. For non-turbo models.
Courtesy of SUBARU OF AMERICA, INC.	498077000	REMOVER	Used for removing the differential taper roller bearing.
Courtesy of SUBARU OF AMERICA, INC.	499247400	INSTALLER	Used for installing the transfer outer snap ring. Used together with SNAP RING OUTER GUIDE (499257300).
Courtesy of SUBARU OF AMERICA, INC.	499257300	SNAP RING OUTER GUIDE	Used for installing the transfer outer snap ring. Used together with INSTALLER (499247400).
Courtesy of SUBARU OF AMERICA, INC.	18630AA010	WRENCH COMPL RETAINER	Used for removing and installing the differential side retainer. Used for adjusting backlash. WRENCH ASSY (499787000) can also be used.
Courtesy of SUBARU OF AMERICA, INC.	398437700	DRIFT	Used for installing the converter case oil seal.
Courtesy of SUBARU OF AMERICA, INC.	398487700	INSTALLER	Used for installing the front differential taper roller bearing.
Courtesy of SUBARU OF AMERICA, INC.	398673600	COMPRESSOR	Used for removing and installing snap ring of the clutch piston.
Courtesy of SUBARU OF AMERICA, INC.	498255400	PLATE	Used for measuring the backlash of hypoid gear.
Courtesy of SUBARU OF AMERICA, INC.	399893600	PLIER	Used for removing and installing snap ring of the clutch piston.
Courtesy of SUBARU OF AMERICA, INC.	498247001	MAGNET BASE	Used for measuring the gear backlash. Used together with DIAL GAUGE (498247100).
Courtesy of SUBARU OF AMERICA, INC.	498247100	DIAL GAUGE	Used for measuring the gear backlash. Used together with MAGNET BASE (498247001).
Courtesy of SUBARU OF AMERICA, INC.	498517000	REPLACER	Used for removing the front roller bearing.
Courtesy of SUBARU OF AMERICA, INC.	398623600	SEAT	Used for removing and installing snap ring of the clutch piston.
Courtesy of SUBARU OF AMERICA, INC.	499267300	STOPPER PIN	Used for installing and adjusting the inhibitor switch.
Courtesy of SUBARU OF AMERICA, INC.	499787700	WRENCH	Used for removing and installing the drive pinion lock nut. Used for adjusting backlash.
Courtesy of SUBARU OF AMERICA, INC.	499787500	ADAPTER	Used for removing and installing the drive pinion lock nut. Used for adjusting backlash.
Courtesy of SUBARU OF AMERICA, INC.	398643600	GAUGE	Used for measuring total end play, extension end play and drive pinion height.
Courtesy of SUBARU OF AMERICA, INC.	498627100	SEAT	Used for holding spring retainer of the clutch piston when removing and installing snap ring.
Courtesy of SUBARU OF AMERICA, INC.	499577000	GAUGE	Used for measuring the mating surface of the transmission to the end face of the reduction gear.
Courtesy of SUBARU OF AMERICA, INC.	499737000	PULLER	Used for removing the reduction driven gear assembly.
Courtesy of SUBARU OF AMERICA, INC.	499737100	PULLER SET	Used for removing the reduction drive gear assembly.
Courtesy of SUBARU OF AMERICA, INC.	498077600	REMOVER	Used for removing the ball bearing.
Courtesy of SUBARU OF AMERICA, INC.	498937110	HOLDER	Used for removing and installing the drive pinion lock nut. Used for adjusting backlash.
Courtesy of SUBARU OF AMERICA, INC.	498677100	COMPRESSOR	Used for installing the 2-4 brake snap ring.
Courtesy of SUBARU OF AMERICA, INC.	498437000	HIGH CLUTCH PISTON GUIDE	Used for installing the high clutch piston.
Courtesy of SUBARU OF AMERICA, INC.	498437100	LOW CLUTCH PISTON GUIDE	Used for installing the low clutch piston.
Courtesy of SUBARU OF AMERICA, INC.	899580100	INSTALLER	Used for press-fitting the ball bearing of the transfer clutch.
Courtesy of SUBARU OF AMERICA, INC.	28399SA010	OIL SEAL PROTECTOR	Used for protecting the oil seal from damage when inserting the front drive shaft.
Courtesy of SUBARU OF AMERICA, INC.	18675AA000	DIFFERENTIAL SIDE OIL SEAL INSTALLER	Used for installing the differential side retainer oil seal.
Courtesy of SUBARU OF AMERICA, INC.	398497701	INSTALLER	Used for installing the needle bearing.
Courtesy of SUBARU OF AMERICA, INC.	899524100	PULLER SET	Use only the bolt. Used together with PULLER SET (499737100). Used together with PULLER (499737000). Puller Cap
Courtesy of SUBARU OF AMERICA, INC.	499247300	INSTALLER	Used for installing the oil pump housing retainer oil seal.
Courtesy of SUBARU OF AMERICA, INC.	398791600	REMOVER	Used for removing and installing the shifter arm spring pin.
Courtesy of SUBARU OF AMERICA, INC.	18854AA000	ANGLE GAUGE	Used for tightening the drive plate.
Courtesy of SUBARU OF AMERICA, INC.	498497100	CRANKSHAFT STOPPER	Used for stopping the drive plate rotation when removing and installing the drive plate. For turbo models.
Courtesy of SUBARU OF AMERICA, INC.	498497300	CRANKSHAFT STOPPER	Used for stopping the drive plate rotation when removing and installing the drive plate. For non-turbo models.
Courtesy of SUBARU OF AMERICA, INC.	1B022XU0	SUBARU SELECT MONITOR III KIT	Used for troubleshooting the electrical system.