Multi-Function Duct Assembly

Install in the reverse order of removal.

NOTE:

Use a new gasket.
The oil pressure switch harness must be positioned to be within the range of a 45° angle on either left or right toward the rear of the vehicle.

Tightening torque:

1.5 N.m (0.2 kgf-m, 1.1 ft-lb)

Fig 1: Identifying Oil Pressure Switch Harness Installation Angle

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

Fig 2: Locating Multi-Function Duct Assembly Bolts (1 Of 2)

Courtesy of SUBARU OF AMERICA, INC.

Fig 3: Locating Multi-Function Duct Assembly Bolts (2 Of 2)

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

19 N.m (1.9 kgf-m, 14.0 ft-lb)

Fig 4: Locating Ground Terminal Bolt

Courtesy of SUBARU OF AMERICA, INC.