Fuel Level Sensor: Removal

WARNING: Place "NO OPEN FLAMES" signs near the working area.

CAUTION:

Be careful not to spill fuel.
If the fuel gauge indicates that two thirds or more of the fuel is remaining, be sure to drain fuel before starting work to avoid the fuel to spill.

NOTE: The fuel level sensor is built in fuel pump assembly.

Remove the fuel pump assembly. Refer to , REMOVAL , Fuel Pump.
Disconnect the connector from the fuel filter assembly.

Fig 1: Locating Fuel Filter Assembly Connector
Courtesy of SUBARU OF AMERICA, INC.
Remove the harness from the hooks (A) on the fuel chamber assembly and remove the fuel temperature sensor (B) from fuel chamber assembly.

Fig 2: Identifying Fuel Temperature Sensor And Hooks
Courtesy of SUBARU OF AMERICA, INC.
Press two claws (A) of the fuel level sensor, and slide the fuel level sensor in the direction of the arrow to remove the fuel level sensor.

Fig 3: Pressing Claws Of Fuel Level Sensor
Courtesy of SUBARU OF AMERICA, INC.