LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Automatic CVT Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control VDC Diagnostics >> Subaru Select Monitor >> Read Current Data >> Parameter Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Parameter Check

NOTE: The parameter data registered in the VDCCM is shown on the display.
  1. Connect the Subaru Select Monitor.
  2. On the << Main Menu >> display, select the {Each System Check}.
  3. On the << System Selection Menu >> display, select the {Brake Control System}.
  4. Click the [OK] button after the {VDC} is displayed.
  5. On the << Brake Control Diagnosis >> display, select the {Confirm on parameter}.
  6. On the {Confirm on parameter} display screen, check that the applied model and grade of the target vehicle are included, and click the [OK] button.
  7. If the applied model and grade of the target vehicle are not included on the {Confirm on parameter} display screen, perform parameter selection and registration. Refer to , PARAMETER SELECTION , OPERATION, Subaru Select Monitor.
scientia non olet · About LEMON Manuals