Rear ABS Wheel Speed Sensor: Installation
CAUTION:
Be careful not to damage the sensor.
Install each part in the reverse order of removal.
NOTE:
Check the identification (mark) on the harness to make sure there is no warpage. Refer to
, SPECIFICATION , General Description.
Tightening torque:
Rear ABS wheel speed sensor: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)
Rear ABS wheel speed sensor bracket: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)