LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Automatic CVT Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection Fuel Systems (H4SO) >> Oil Temperature Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oil Temperature Sensor: Removal

  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G07909704Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the air intake boot assembly. Refer to AIR INTAKE BOOT .
  3. Disconnect the connector from oil temperature sensor.
  4. Remove the oil temperature sensor.
Fig 2: Locating Oil Temperature Sensor Connector
G06648328Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals