LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Automatic CVT Trans >> Repair and Diagnosis >> General Information >> OBD-II Drive Cycles >> Drive Cycles >> Drive Cycle E >> Diagnostic Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Procedure

  1. Make sure that the battery voltage is 10.9 V or more.
  2. Perform the Clear Memory Mode.
  3. Drive for approximately 30 L (7.9 US gal, 6.6 Imp gal) of fuel.
    NOTE:
    • It is acceptable to drive the vehicle intermittently.
    • Do not disconnect the terminal of battery during diagnosis. (Data will be cleared when disconnecting the battery terminals.)
scientia non olet · About LEMON Manuals