Dismounting/Mounting Procedures: Notes
CAUTION:
The tire should be dismounted from the wheel using the tire changer manufacturer's instructions. Use the following information to avoid damage during the dismounting/mounting procedures.
NOTE:
It may not be possible to install tire pressure sensors on some types of wheels. Use wheels that have the same part number as the standard equipment wheels.
NOTE:
When a tire pressure sensor or TPM control module is replaced, or when wheels are changed, the tire pressure sensor IDs must be registered. See RESET PROCEDURES .
NOTE:
If tires were rotated, the performance and function of TPM system is not affected. However, tire positions are not displayed in the Subaru Select Monitor correctly.
NOTE:
If adjustment of tire pressure is performed indoors in winter, the difference between indoor and outdoor temperature is large. When the vehicle is out, tire pressure will go down and tire pressure warning light might operate. To avoid this situation, adjustment of tire pressure needs to be slightly high considering the difference between indoor and outdoor temperature (about 1 psi (7 kPa) for every 10°F (5.6°C) difference).