Wheel Alignment: Inspection: Notes
Check the following items before performing the wheel alignment measurement.
- Tire inflation pressure
- Uneven wear of RH and LH tires, or difference of sizes
- Tire runout
- Excessive play and wear of ball joint
- Excessive play and wear of tie-rod end
- Excessive play of wheel bearing
- Right and left wheel base imbalance
- Deformation and excessive play of steering link
- Deformation and excessive play of suspension parts
Check, adjust and measure the wheel alignment in accordance with the following procedures.
| 1 | Wheel arch height (front and rear wheels) | Inspection: Refer to , REAR WHEEL TOE-IN , INSPECTION, Wheel Alignment. |
| ↓ | ||
| 2 | Camber (front and rear wheels) | Inspection: Refer to
, CAMBER , INSPECTION, Wheel Alignment. Adjustment: Refer to , FRONT CAMBER , ADJUSTMENT, Wheel Alignment. |
| ↓ | ||
| 3 | Caster (front wheel) | Inspection: Refer to , CASTER , INSPECTION, Wheel Alignment. |
| ↓ | ||
| 4 | Steering angle | Inspection: Refer to
, FRONT WHEEL TOE-IN , INSPECTION, Wheel Alignment. Adjustment: Refer to , STEERING ANGLE , ADJUSTMENT, Wheel Alignment. |
| ↓ | ||
| 5 | Front wheel toe-in | Inspection: Refer to
, STEERING ANGLE , INSPECTION, Wheel Alignment. Adjustment: Refer to , FRONT WHEEL TOE-IN , ADJUSTMENT, Wheel Alignment. |
| ↓ | ||
| 6 | Rear wheel toe-in | Inspection: Refer to
, WHEEL ARCH HEIGHT , INSPECTION, Wheel Alignment. Adjustment: Refer to , REAR WHEEL TOE-IN , ADJUSTMENT, Wheel Alignment. |
| ↓ | ||
| 7 | Thrust angle | Inspection: Refer to
, THRUST ANGLE , INSPECTION, Wheel Alignment. Adjustment: Refer to , THRUST ANGLE , ADJUSTMENT, Wheel Alignment. |