Converter Case Cover: Removal
- Remove the transmission assembly from the vehicle. Refer to
, REMOVAL , Automatic Transmission Assembly.
- Remove the air breather hose. Refer to
, REMOVAL , Air Breather Hose.
- Remove the oil pan and control valve body. Refer to
, REMOVAL , Control Valve Body.
- Remove the transmission harness. Refer to
, REMOVAL , Transmission Harness.
- Remove the extension case. Refer to
, REMOVAL , Extension Case.
- Remove the rear drive shaft. Refer to
, REMOVAL , Rear Drive Shaft.
- Remove the transfer clutch assembly. Refer to
, REMOVAL , Transfer Clutch.
- Remove the transfer reduction driven gear assembly. Refer to
, REMOVAL , Transfer Reduction Driven Gear.
- Remove the intermediate case. Refer to
, REMOVAL , Intermediate Case.
- Remove the forward clutch assembly. Refer to
, REMOVAL , Forward Clutch Assembly.
- Remove the transmission case. Refer to
, REMOVAL , Transmission Case.
- Remove the primary pulley, secondary pulley and variator chain. Refer to
, REMOVAL , Primary Pulley and Secondary Pulley.
- Remove the drive pinion shaft assembly. Refer to
, REMOVAL , Drive Pinion Shaft Assembly.
- Remove the oil stopper plate and lubrication pipe.
Courtesy of SUBARU OF AMERICA, INC.
- Flip over the converter case.
- Remove the oil pump chain cover and the oil pump chain. Refer to
, REMOVAL , Oil Pump Chain.
- Remove the converter case cover.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the O-ring.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the seal ring from converter case cover.
Courtesy of SUBARU OF AMERICA, INC.