Converter Case: Installation
- Install the front reduction drive gear and front reduction driven gear. Refer to , INSTALLATION , Front Reduction Drive Gear.
- Install the converter case cover. Refer to , INSTALLATION , Converter Case Cover.
- Install the front differential assembly. Refer to , INSTALLATION , Front Differential Assembly.
- Install the drive pinion shaft assembly. Refer to , INSTALLATION , Drive Pinion Shaft Assembly.
- Install the primary pulley, secondary pulley and steel chain. Refer to , INSTALLATION , Primary Pulley and Secondary Pulley.
- Install the transmission case. Refer to , INSTALLATION , Transmission Case.
- Install the forward clutch assembly. Refer to , INSTALLATION , Forward Clutch Assembly.
- Install the intermediate case. Refer to , INSTALLATION , Intermediate Case.
- Install the transfer reduction driven gear. Refer to , INSTALLATION , Transfer Reduction Driven Gear.
- Install the transfer clutch assembly. Refer to , INSTALLATION , Transfer Clutch.
- Install the rear drive shaft. Refer to , INSTALLATION , Rear Drive Shaft.
- Install the extension case. Refer to , INSTALLATION , Extension Case.
- Install the primary speed sensor. Refer to , INSTALLATION , Primary Speed Sensor.
- Install the secondary pressure sensor. Refer to , INSTALLATION , Secondary Pressure Sensor.
- Install the transmission harness. Refer to , INSTALLATION , Transmission Harness.
- Install the control valve body and oil pan. Refer to , INSTALLATION , Control Valve Body.
- Install the air breather hose. Refer to , INSTALLATION , Air Breather Hose.
- Install the transmission assembly to the vehicle. Refer to , INSTALLATION , Automatic Transmission Assembly.