LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Automatic CVT Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transmission >> Transmission Harness >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmission Harness: Inspection

  1. Visually check the harness and connector for damage or crack.
  2. Check the harness terminal for rust, disconnection or poor contact.
  3. Check the continuity between harness terminals and oil temperature sensor.
    NOTE: Refer to WIRING SECTION for transmission harness terminal and oil temperature sensor terminal. Refer to SYSTEM WIRING DIAGRAMS , or SYSTEM WIRING DIAGRAMS .

    Harness continuity standard 

    Less than 1 Ω 

    Oil temperature sensor standard 

    Approx. 2.6 kΩ (at 20°C) 

scientia non olet · About LEMON Manuals