LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Entertainment Systems >> Entertainment >> Audio System >> Inspection >> Check Each Vehicle Signal >> Check Back Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Back Sensor

  1. Turn the parking brake switch to ON and depress the brake pedal, then put the gear in reverse.
  2. Make sure that "ON" is displayed in REV.
    Fig 1: Screen Display - ILL+
    G00523925Courtesy of SUBARU OF AMERICA, INC.

    ON: Normal.

    OFF: Abnormal. Check the signal line connector. If there are no problems, the unit could be faulty.