LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Security And Locks >> Impact Sensor >> Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Impact Sensor: Operation

  1. IMPACT SENSOR SETTING USING SUBARU SELECT MONITOR
  2. Prepare the Subaru Select Monitor kit.
  3. Turn the ignition switch to ON (engine OFF) and run the "PC application for Subaru Select Monitor".
  4. On << System Selection Menu >> display, select {Integ. unit mode}.
  5. Select {ECM customizing}.
  6. Perform impact sensor ON/OFF setting.
    • Installed: ON
    • Removed: OFF
  7. Perform impact sensor ON/OFF setting.
    • Installed: ON
    • Removed: OFF
  8. Turn the ignition switch to OFF and remove the Subaru Select Monitor.
scientia non olet · About LEMON Manuals