LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Security And Locks >> Keyless Entry Control Module >> Removal >> Outback Model
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Outback Model

  1. Disconnect the ground cable from battery.
  2. Remove the rear quarter trim LH. Refer to REAR QUARTER TRIM .
  3. Remove the keyless entry control module.
    1. Disconnect the connector.
    2. Remove the bolt and remove the keyless entry control module.
      Fig 1: Removing Keyless Entry Control Module (Outback Model)
      G06653940Courtesy of SUBARU OF AMERICA, INC.