LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Power Window System >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Window System: Inspection

Symptoms Inspection order
All power windows do not operate.
  1. Check the fuse.
  2. Check the power window relay.
  3. Check the wiring harness.
Particular window does not operate.
  1. Check the fuse.
  2. Check the power window main switch.
  3. Check the power window sub-switch.
  4. Check the power window motor.
  5. Check the wiring harness.
"Window Lock" does not operate. Check the power window main switch.
Driver's side window moves slightly (approx. 20 mm (0.79 in)). (model with driver's side AUTO UP function)
  1. Check the power window motor.
  2. Check the power window main switch.
  3. Check the wiring harness.
Driver's side window moves slightly (approx. 50 mm (1.97 in)). (model with driver's side AUTO UP function) (This is not malfunction.) Perform reset operation A. Refer to , RESET OPERATION A , OPERATION, Power Window System.
Driver's side window does not close completely. (model with driver's side AUTO UP function) (After fully closed with AUTO UP, the window reverses and slightly opens.) Perform reset operation B. Refer to , RESET OPERATION B , OPERATION, Power Window System.
scientia non olet · About LEMON Manuals