Rearview Mirror: Installation

CAUTION: When tightening the mounting TORX® screw, be sure to observe the tightening torque. Otherwise, the mount may be damaged in over-torque conditions.

Install each part in the reverse order of removal.

Tightening torque:

Refer to "COMPONENT" of "General Description". Refer to , MIRROR , COMPONENT, General Description.

NOTE: If the mirror mount is removed, it is attached according to the following procedures.

Remove the old adhesive completely.
Attach the mirror mount by matching with the mark on the windshield glass.
Make sure that the mirror mount is firmly adhered.

Adhesive:

REPAIR KIT IN MR (Part No. 65029FC000) or equivalent