Abs Warning Light Does Not Go Off: Trouble Symptom
When starting the engine, the ABS warning light is kept ON.
| Step | Check | Yes | No |
|---|---|---|---|
| 1 READ DTC. Read the DTC. Refer to , READ DIAGNOSTIC TROUBLE CODE (DTC) . |
Is DTC displayed? | Perform the diagnosis according to DTC. Refer to , LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . | Go to step 2 . |
| 2 CHECK LAN SYSTEM. Perform the diagnosis for LAN system. Refer to OPERATION . |
Is there any fault in LAN system? | Perform the diagnosis according to DTC for LAN system. Refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . | Go to step 3 . |
| 3 CHECK COMBINATION METER. Check the combination meter. Refer to SELF-DIAGNOSIS DISPLAY MODE . |
Is combination meter OK? | Replace the VDCCM & H/U. Refer to VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDCCM & H/U) . | Replace the combination meter. Refer to COMBINATION METER . |