Dealer Customize Mode
The combination meter can be customized with dealer customize according to the following procedure.
- Within 3 seconds after turning the ignition switch to ON, set the lighting switch to tail light or headlight position.
- Press the trip meter knob five times.
- Turn the lighting switch to OFF, and press the trip meter knob five times.
- Set the lighting switch to tail light or headlight position again, and press the trip meter knob five times.
- Move on to the "DEALER CUSTOMIZE MODE".
- When the dealer customize mode operates, the LCD displays each adjustment screen.
- The dealer customize mode consists of three setting screens. {Avg.F/E Correction Screen}, {Ambient Temp. Correction Screen} and {Clock Adjust. Screen} is displayed cyclically in this order every time the trip meter knob is tapped.
- Holding down the trip meter knob while each setting screen is displayed can change the setting value.
NOTE:
When ignition switch is turned OFF or the vehicle is driven, the customize mode is cancelled automatically.
| No. | Customize mode | Initial value | Correction range |
|---|---|---|---|
| 1 | Avg.F/E Correction Screen | ±0% | ±10% |
| 2 | Ambient Temp. Correction Screen | ±0°C (°F) | ±3°C (°F) |
| 3 | Clock Adjust. Screen | on | on or off |