LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> Electrical >> Horns >> Horn System >> Relay and Fuse >> Inspection >> Check Relay
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Relay

  1. Check the resistance between relay terminals.
    Terminal No. Inspection conditions Specification Circuit
    1 - 2 Always 1 MΩ or more
    G06653408Courtesy of SUBARU OF AMERICA, INC.
    1 - 2 Apply battery voltage between 4 - 3 terminals. Less than 1 Ω
  2. Replace the relay if the inspection result is not within the standard value.
scientia non olet · About LEMON Manuals