LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Diagnostics (H4SO) >> Diagnostics for Engine Starting Failure >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostics for Engine Starting Failure: Procedure

1. Check of the fuel amount
2. Inspection of starter motor circuit Refer to , STARTER MOTOR CIRCUIT , Diagnostics for Engine Starting Failure.
3. Inspection of ECM power supply and ground line Refer to , CHECK POWER SUPPLY AND GROUND LINE OF ENGINE CONTROL MODULE (ECM) , Diagnostics for Engine Starting Failure.
4. Inspection of ignition control system Refer to , IGNITION CONTROL SYSTEM , Diagnostics for Engine Starting Failure.
5. Inspection of fuel pump circuit Refer to , FUEL PUMP CIRCUIT , Diagnostics for Engine Starting Failure.
6. Inspection of fuel injector circuit Refer to , FUEL INJECTOR CIRCUIT , Diagnostics for Engine Starting Failure.