Special Tool

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

SPECIAL TOOL SPECIFICATION

ILLUSTRATION	TOOL NUMBER	DESCRIPTION	REMARKS
Courtesy of SUBARU OF AMERICA, INC.	398477701	HANDLE	Used for installing the front and rear bearing cones.
Courtesy of SUBARU OF AMERICA, INC.	398217700	ATTACHMENT SET	Stand for rear differential carrier disassembly and assembly.
Courtesy of SUBARU OF AMERICA, INC.	498447120	INSTALLER	Used for installing the front oil seal.
Courtesy of SUBARU OF AMERICA, INC.	498427200	FLANGE WRENCH	Used for stopping rotation of companion flange when removing and tightening self-lock nut.
Courtesy of SUBARU OF AMERICA, INC.	399780104	WEIGHT	Used for installing the front bearing cone and the pilot bearing companion flange.
Courtesy of SUBARU OF AMERICA, INC.	498247001	MAGNET BASE	Used for measuring backlash between side gear and pinion, and hypoid gear. Used with DIAL GAUGE (498247100).
Courtesy of SUBARU OF AMERICA, INC.	498247100	DIAL GAUGE	Used for measuring backlash between side gear and pinion, and hypoid gear. Used with MAGNET BASE (498247001).
Courtesy of SUBARU OF AMERICA, INC.	398177700	INSTALLER	Used for installing the rear bearing cone.
Courtesy of SUBARU OF AMERICA, INC.	398477703	DRIFT 2	Used for press-fitting bearing race (rear) of differential carrier.
Courtesy of SUBARU OF AMERICA, INC.	398437700	DRIFT	Used for installing the side oil seal.
Courtesy of SUBARU OF AMERICA, INC.	398517700	REPLACER	Used for removing rear bearing cone.
Courtesy of SUBARU OF AMERICA, INC.	398487700	DRIFT	Used for press-fitting side bearing cone.
Courtesy of SUBARU OF AMERICA, INC.	398527700	PULLER ASSY	Used for removing front oil seal.
Courtesy of SUBARU OF AMERICA, INC.	28099PA090	OIL SEAL PROTECTOR	Used for installing the rear drive shaft to the rear differential. For oil seal protection
Courtesy of SUBARU OF AMERICA, INC.	399703600	PULLER ASSY	Used for removing companion flange.
Courtesy of SUBARU OF AMERICA, INC.	899874100	INSTALLER	Used for installing the companion flange.
Courtesy of SUBARU OF AMERICA, INC.	498077000	REMOVER	Used for removing the differential side bearing cone.
Courtesy of SUBARU OF AMERICA, INC.	899864100	REMOVER	Used for removing the differential side bearing.
Courtesy of SUBARU OF AMERICA, INC.	499277200	INSTALLER	Used for installing the front bearing cone.
Courtesy of SUBARU OF AMERICA, INC.	18758AA000	PULLER	Used for removing side bearing cup.
Courtesy of SUBARU OF AMERICA, INC.	18678AA000	DUMMY SHAFT	Used for adjusting pinion height and preload.
Courtesy of SUBARU OF AMERICA, INC.	18831AA010	DIFFERENTIAL CARRIER GAUGE	Used for adjusting pinion height.
Courtesy of SUBARU OF AMERICA, INC.	18630AA010	WRENCH COMPLY RETAINER	Used for removing and installing the side oil seal holder.
Courtesy of SUBARU OF AMERICA, INC.	498447100	INSTALLER	Used for installing the oil seal.
Courtesy of SUBARU OF AMERICA, INC.	399520105	SEAT	Used for removing the side bearing cone.
Courtesy of SUBARU OF AMERICA, INC.	398417700	DRIFT	Used for installing side bearing race.
Courtesy of SUBARU OF AMERICA, INC.	18854AA000	ANGLE GAUGE	Used for installing the hypoid driven gear.
Courtesy of SUBARU OF AMERICA, INC.	41399FG000	SPECIAL TOOL ASSY	Used for removing and installing the rear differential mount bushing. Use (1), (3), (5), (6), (7), (8) and (9) for removal. Use (2), (4), (5), (6), (7), (8) and (9) for installation. (1) SPECIAL TOOL A (41399FG010) (2) SPECIAL TOOL B (41399FG020) (3) SPECIAL TOOL C (41399FG030) (4) SPECIAL TOOL D (41399FG040) (5) SPECIAL TOOL SLEEVE (41399FG050) (6) SPECIAL TOOL RING (41399FG060) (7) SPECIAL TOOL NUT (41399FG070) (8) SPECIAL TOOL BEARING (41399FG080) (9) SPECIAL TOOL SHAFT (41399FG090)
Courtesy of SUBARU OF AMERICA, INC.	41399FG010	SPECIAL TOOL A	Used for removing the rear differential mount bushing. For combination of tools for removal, refer to "SPECIAL TOOL ASSY (41399FG000)"
Courtesy of SUBARU OF AMERICA, INC.	41399FG020	SPECIAL TOOL B	Used for installing the rear differential mount bushing. For combination of tools for installation, refer to "SPECIAL TOOL ASSY (41399FG000)".
Courtesy of SUBARU OF AMERICA, INC.	41399FG030	SPECIAL TOOL C	Used for installing the rear differential mount bushing. For combination of tools for installation, refer to "SPECIAL TOOL ASSY (41399FG000)".
Courtesy of SUBARU OF AMERICA, INC.	41399FG040	SPECIAL TOOL D	Used for installing the rear differential mount bushing. For combination of tools for installation, refer to "SPECIAL TOOL ASSY (41399FG000)".
Courtesy of SUBARU OF AMERICA, INC.	41399FG050	SPECIAL TOOL SLEEVE	Used for removing and installing the rear differential mount bushing. For combination of tools for removal and installation, refer to "SPECIAL TOOL ASSY (41399FG000)".
Courtesy of SUBARU OF AMERICA, INC.	41399FG060	SPECIAL TOOL RING	Used for removing and installing the rear differential mount bushing. For combination of tools for removal and installation, refer to "SPECIAL TOOL ASSY (41399FG000)".
Courtesy of SUBARU OF AMERICA, INC.	41399FG080	SPECIAL TOOL BEARING	Used for removing and installing the rear differential mount bushing. For combination of tools for removal and installation, refer to "SPECIAL TOOL ASSY (41399FG000)".
Courtesy of SUBARU OF AMERICA, INC.	41399FG090	SPECIAL TOOL SHAFT	Used for removing and installing the rear differential mount bushing. For combination of tools for removal and installation, refer to "SPECIAL TOOL ASSY (41399FG000)".