LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Entertainment System) >> Antenna Amplifier >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Antenna Amplifier: Removal

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from the battery.
  2. Remove the rear gate trim. Ref. to REMOVAL , Rear Gate Trim.
  3. Disconnect the harness connectors and terminals.
  4. Remove the screws and detach the antenna amplifier.
    Fig 1: Locating Antenna Amplifier Screws
    G05033450Courtesy of SUBARU OF AMERICA, INC.