MFD Error Display And Fault Content

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

MFD ERROR DISPLAY AND FAULT CONTENT REFERENCE CHART

Display contents	Fault cause
CHECK_DISC	During playback, it was not possible to read data from the CD due to scratches on the CD, etc. Disc inserted upside-down, cannot detect disc. Because of a focus error, cannot read disc. An error occurred in the decoder section. A problem occurred in the internal circuit during playback due to high temperature, etc.
MECHA_ERROR	During disc loading, a problem occurred in the traverse drive. Operation became impossible during disc change, loading, or eject.
NO_FILE	After disc read operation is completed, the number of files was 0 A disc with no data was inserted.
	Disc is dirty, or is upside down. Nothing is recorded. Is not an audio disc. There are scratches on the disk. A disc that cannot be played back was used.
	A mechanical error/operational error of some sort occurred.
	No disc is inserted.

NOTE: When the above errors are displayed, check the disc, and if no problems can be found, repair or replace the unit.