Rearview Camera System: Inspection

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

When the display does not come on
The screen of rear view camera is not displayed. (The navigation screen is displayed normally.)
1. Check the back sensor for each connection: Make sure that the back sensor is ON. Ref. to CHECK THE BACK SENSOR , INSPECTION, Navigation System.
2. Check the rear view camera connection.
3. Check the rear view camera control module.
When marker does not show
1. Check the rear view camera connection.
2. Check the rear view camera control module.