Steering Satellite Switch: Inspection
WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
Measure the resistance between satellite switch connector terminals.
TERMINALS RESISTANCE CHART
| Switch | Area | Terminal No. | Standard |
|---|---|---|---|
| Mute Volume (+) Volume (-) Mode Seek (UP↑) Seek (DOWN↓) |
All OFF | 1 and 2 | Approx. 47 kΩ |
| Mute | ON | 1 and 2 | Approx. 22 Ω |
| Volume (+) | ON | 1 and 2 | Approx. 90 Ω |
| Volume (-) | ON | 1 and 2 | Approx. 200 Ω |
| Mode | ON | 1 and 2 | Approx. 360 Ω |
| Seek (UP↑) | ON | 1 and 2 | Approx. 690 Ω |
| Seek (DOWN↓) | ON | 1 and 2 | Approx. 1.5 kΩ |
Replace the satellite switch if faulty.