Steering Satellite Switch: Removal
WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the ground cable from the battery.
- Set the tire to the straight-ahead position.
- Remove the airbag module. Ref. to
REMOVAL
, Driver's Airbag Module.WARNING: If there are airbag modules mounted, always refer to "Airbag System" when performing airbag module service. Ref. to INSPECTION , Driver's Airbag Module.
- Remove the steering wheel. Refer to the appropriate article.
- Remove the cover from steering wheel.
- Remove 2 satellite switch mounting screws each from the left and right sides.
- Remove the satellite switch.