Headlight Assembly: Removal

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery.
Remove the air intake duct.

Fig 1: Locating Air Intake Duct Bolt
Courtesy of SUBARU OF AMERICA, INC.
Remove the front bumper. Refer to REMOVAL , Front Bumper.
Remove the support plate.

Fig 2: Identifying Support Plate
Courtesy of SUBARU OF AMERICA, INC.
Remove the five bolts, then remove the headlight assembly.

Fig 3: Locating Headlight Assembly Bolts
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector and then detach the rear headlight assembly.